• 1200 L Wash Pot with Copper Onion Head
• Gin Basket Column for infusing botanicals
• 4-plate Whiskey Column with Bubblers & Dephlegmator
• 16-plate Vodka Column with Bubblers & Dephlegmator
• Condenser Column with Proofing Parrot
• Fully plumbed CIP system with pump

This complete distilling system is the perfect option for craft distilleries that want to make a range of spirits without compromising. Install once and never have to reconfigure the system to switch from a whiskey run to a vodka run. Whereas other stills need to be broken down and rebuilt depending on what spirit is being made, switching between spirits on this multi-column still is as easy as opening and closing a few valves. With the infusion column, 4-plate copper column, and 16-plate stainless column, this unit can quite literally make any spirit you desire—gin, rum, vodka, whiskey, brandy, tequila—it does it all!

Wash Pot
The steam jacketed Wash Pot has a gross volume of 1400L allowing for a maximum working volume of 1200L with a 15% headspace inside the pot. The kettle features analog thermometer and PT100 relay probe in the headspace, pressure gauge and relief valve, raked bottom for thorough draining, and manway with sight glass to monitor your wash boil. From the kettle, vapor rises through the copper onion-shaped expansion chamber, through the lyne arm and into the column manifold.

Columns & Routing Vapor
The column manifold features a series of 3-way valves used to route vapor into or past each column. For example, during a vapor infusion run while making gin, you would route the vapor into the infusion column to pass through any botanicals you've added to the gin basket, and then bypass the copper 4-plate column, bypass the steel 16-plate column, and route the vapor to the product condenser. Conversely, for the highest purity neutral spirit, you would bypass the infusion column and route the vapor through both the copper 4-plate column and steel 16-plate column before entering the condenser. The beauty of this system is how easily you can adapt it to the type of spirit you want to produce. Simply, bypass columns or close off individual plates as needed.

Clean-In-Place
As mentioned above, this distillation system truly is a one-time installation with no breakdown required—when it comes to making different spirits but also when it comes to cleaning. Each part of the system from the kettle to the condenser and each plate features a CIP spray ball for convenient and thorough cleaning. The included CIP pump is powerful enough to clean an entire column at once, or you can flip the valves to clean individual plates if desired.

Please note:

You will need to add a power supply for the pump and agitator (3 phase, 220V), pressure regulator for steam, and plumbing for the condenser's water source.

This Still requires at least 1000 BTU/hr per gallon or 320,000 BTU/hr total of steam.

Approximate Dimensions: 15.5' x 5.25' x 17.75'

Gearing up to open your own craft distillery or add spirits to your current establishment's offerings? The best place to start is the TTB's website where you'll find federal licensing applications and other helpful resources. In addition, please check with your state licensing office for further information and requirements.